⟁ Nebraska Well Data field records · 2026 survey

Nebraska Well Data › Blaine County

Blaine County, Nebraska: well depth, water level & drilling cost

✓ 678 NeDNR records · verified 2026-10-12

126 ftmedian well depth
90 ft–194 fttypical depth range
19 ftmedian static water level
16 gpmmedian yield (524 tests)

Pull every recorded well near a Blaine County address — $49

How deep are wells in Blaine County, Nebraska?

The median drilled well depth in Blaine County is 126 ft, based on 675 wells with recorded depths in the state NeDNR database. Half of all wells fall between 90 ft and 194 ft; 90% are shallower than 320 ft. Wells drilled since 2016 have a median depth of 125 ft.

How much does it cost to drill a well in Blaine County?

Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Blaine County?

The median static water level is 19 ft below ground surface (middle half of wells: 11 ft–64 ft), from 671 measurements.

How much water do wells in Blaine County produce?

The median tested yield is 16 gpm (middle half: 10 gpm–700 gpm), from 524 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 24 50–100 ft 178 100–150 ft 212 150–200 ft 96 200–300 ft 75 300–400 ft 69 400–600 ft 21 600+ ft 0
Looking at a specific property in Blaine County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Blaine County

Free. Goes to licensed drillers working Blaine County.

Well records by ZIP code in Blaine County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.