⟁ Nebraska Well Data field records · 2026 survey

Nebraska Well Data › Cuming County

Cuming County, Nebraska: well depth, water level & drilling cost

✓ 1,364 NeDNR records · verified 2026-10-12

110 ftmedian well depth
52 ft–175 fttypical depth range
42 ftmedian static water level
500 gpmmedian yield (988 tests)

Pull every recorded well near a Cuming County address — $49

How deep are wells in Cuming County, Nebraska?

The median drilled well depth in Cuming County is 110 ft, based on 1,341 wells with recorded depths in the state NeDNR database. Half of all wells fall between 52 ft and 175 ft; 90% are shallower than 220 ft. Wells drilled since 2016 have a median depth of 110 ft.

How much does it cost to drill a well in Cuming County?

Applying published per-foot rates to the local median depth of 110 ft: drilling and casing alone typically runs $2,750–$7,150; a complete system including pump, pressure tank, and hookup typically runs $6,600–$11,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Cuming County?

The median static water level is 42 ft below ground surface (middle half of wells: 13 ft–82 ft), from 1,292 measurements.

How much water do wells in Cuming County produce?

The median tested yield is 500 gpm (middle half: 25 gpm–800 gpm), from 988 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 293 50–100 ft 306 100–150 ft 285 150–200 ft 226 200–300 ft 213 300–400 ft 10 400–600 ft 7 600+ ft 1
Looking at a specific property in Cuming County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Cuming County

Free. Goes to licensed drillers working Cuming County.

Well records by ZIP code in Cuming County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.