⟁ Nebraska Well Data field records · 2026 survey

Nebraska Well Data › Keith County

Keith County, Nebraska: well depth, water level & drilling cost

✓ 3,011 NeDNR records · verified 2026-10-12

193 ftmedian well depth
110 ft–291 fttypical depth range
58 ftmedian static water level
49 gpmmedian yield (2,490 tests)

Pull every recorded well near a Keith County address — $49

How deep are wells in Keith County, Nebraska?

The median drilled well depth in Keith County is 193 ft, based on 2,941 wells with recorded depths in the state NeDNR database. Half of all wells fall between 110 ft and 291 ft; 90% are shallower than 390 ft. Wells drilled since 2016 have a median depth of 200 ft.

How much does it cost to drill a well in Keith County?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Keith County?

The median static water level is 58 ft below ground surface (middle half of wells: 22 ft–149 ft), from 2,876 measurements.

How much water do wells in Keith County produce?

The median tested yield is 49 gpm (middle half: 16 gpm–844 gpm), from 2,490 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 253 50–100 ft 376 100–150 ft 451 150–200 ft 431 200–300 ft 718 300–400 ft 491 400–600 ft 215 600+ ft 6
Looking at a specific property in Keith County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Keith County

Free. Goes to licensed drillers working Keith County.

Well records by ZIP code in Keith County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.