⟁ Nebraska Well Data field records · 2026 survey

Nebraska Well Data › Seward County

Seward County, Nebraska: well depth, water level & drilling cost

✓ 3,082 NeDNR records · verified 2026-10-12

174 ftmedian well depth
117 ft–260 fttypical depth range
80 ftmedian static water level
400 gpmmedian yield (2,579 tests)

Pull every recorded well near a Seward County address — $49

How deep are wells in Seward County, Nebraska?

The median drilled well depth in Seward County is 174 ft, based on 3,015 wells with recorded depths in the state NeDNR database. Half of all wells fall between 117 ft and 260 ft; 90% are shallower than 343 ft. Wells drilled since 2016 have a median depth of 200 ft.

How much does it cost to drill a well in Seward County?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Seward County?

The median static water level is 80 ft below ground surface (middle half of wells: 57 ft–105 ft), from 2,915 measurements.

How much water do wells in Seward County produce?

The median tested yield is 400 gpm (middle half: 20 gpm–800 gpm), from 2,579 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 161 50–100 ft 364 100–150 ft 691 150–200 ft 434 200–300 ft 918 300–400 ft 286 400–600 ft 161 600+ ft 0
Looking at a specific property in Seward County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Seward County

Free. Goes to licensed drillers working Seward County.

Well records by ZIP code in Seward County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.