⟁ Nebraska Well Data field records · 2026 survey

Nebraska Well Data › Thayer County

Thayer County, Nebraska: well depth, water level & drilling cost

✓ 2,239 NeDNR records · verified 2026-10-12

160 ftmedian well depth
120 ft–200 fttypical depth range
90 ftmedian static water level
800 gpmmedian yield (1,978 tests)

Pull every recorded well near a Thayer County address — $49

How deep are wells in Thayer County, Nebraska?

The median drilled well depth in Thayer County is 160 ft, based on 2,159 wells with recorded depths in the state NeDNR database. Half of all wells fall between 120 ft and 200 ft; 90% are shallower than 240 ft. Wells drilled since 2016 have a median depth of 140 ft.

How much does it cost to drill a well in Thayer County?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Thayer County?

The median static water level is 90 ft below ground surface (middle half of wells: 70 ft–104 ft), from 2,128 measurements.

How much water do wells in Thayer County produce?

The median tested yield is 800 gpm (middle half: 450 gpm–1,200 gpm), from 1,978 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 54 50–100 ft 228 100–150 ft 619 150–200 ft 624 200–300 ft 624 300–400 ft 9 400–600 ft 0 600+ ft 1
Looking at a specific property in Thayer County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Thayer County

Free. Goes to licensed drillers working Thayer County.

Well records by ZIP code in Thayer County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.