Nebraska Well Data › Richardson County › Falls City (68355)
Falls City, NE (68355): well depth, water level & drilling cost
✓ 333 NeDNR records · Richardson County
Pull every recorded well near a Falls City (68355) address — $49
How deep are wells in and around Falls City (68355), Nebraska?
The median drilled well depth in and around Falls City (68355) is 50 ft, based on 310 wells with recorded depths in the state NeDNR database. Half fall between 28 ft and 89 ft; 90% are shallower than 174 ft.
How much does it cost to drill a well in and around Falls City (68355)?
Applying published per-foot rates to the local median depth of 50 ft: drilling and casing alone typically runs $1,250–$3,250; a complete system including pump, pressure tank, and hookup typically runs $3,000–$5,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Falls City (68355)?
The median static water level is 23 ft below ground surface (middle half of wells: 16 ft–36 ft), from 241 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Richardson County.
Part of Richardson County well records.
Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.