Nebraska Well Data › Deuel County › Big Springs (69122)
Big Springs, NE (69122): well depth, water level & drilling cost
✓ 533 NeDNR records · Deuel County
Pull every recorded well near a Big Springs (69122) address — $49
How deep are wells in and around Big Springs (69122), Nebraska?
The median drilled well depth in and around Big Springs (69122) is 100 ft, based on 517 wells with recorded depths in the state NeDNR database. Half fall between 45 ft and 180 ft; 90% are shallower than 323 ft.
How much does it cost to drill a well in and around Big Springs (69122)?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Big Springs (69122)?
The median static water level is 20 ft below ground surface (middle half of wells: 10 ft–62 ft), from 489 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Deuel County.
Part of Deuel County well records.
Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.